|
|
|
|
|
|
DRILL COLLAR SEVERING TOOL DUAL FIRE EBW INITIATED
|
|
|
Designed to sever drill collars and heavyweight drill pipe reliably and safety during
Pipe Recovery Operations
|
|
|
|
|
|
Benefits and Capabilities include:
|
|
|
Air Shippable' as Class 1.4S
Conforms to API RP-67
Utilizes Explosive Bridge-Wire Detonators for increased safety
Safe from Electrostatic Discharge
No need to shut down Rig Communications or Cathodic Protection
EBW Detonators increase the precision of the collision effect for maximum performance
|
|
|
|
|
|
INTRODUCING THE ECOSSE PX-1 ...A HIGH PERFORMANCE, EXPENDABLE EBW/EFI
FIRESET
The Ecosse PX-1 is a low cost, high performance expendable EBW/EFI fireset. As with
most of the firesets on the market today, its circuit, a high voltage supply, and
an output section. The safety circuit, of course, provides most of the protection.
The high voltage supply takes the input voltage (205V @ 160mA), steps it up to 5kV,
and charges the capacitor in the output section. The output section contains a spark-gap
as an over voltage switch; when the voltage on the output capacitor reaches 5kV,
the spark-gap breaks down and dumps the stored energy into the attached detonator.
The PX-1 has the highest temperature rating of any system on the market, with an
operating range from – 25ºC to +225ºC. It can initiate EFI detonators through six
inches of twisted-pair wires or 3 feet of coax cable; EBW detonators can be fired
through 10ft and more of twisted-pair wires. Its compact dimensions (5” X 0.82”
X 0.74) allow it to fit in virtually every gun system in use today, including pressure
housings with an OD of 1-3/8”.
It has been fully certified by Orion International Technologies at Sandia National
Laboratories to standards that exceed any practical level of threat that might exist
in the oilfield environment, including stray DC voltages from -600VDC to +150VDC,
AC voltages at 600V rms from 40Hz through 20kHz, RF testing from 260kHz at 50V/m,
electrostatic discharges, and severe direct lightning strikes to the wireline within
3ft of the PX-1 itself. Particularly on offshore platforms, these safety features
can result in very significant cost savings for the operator.
|
|

|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
PX-1 BLOCK DIAGRAM AND SPECIFICATIONS
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|